Buy with complete confidence: This selection of quality boat products is guaranteed to meet your expectations – or we’ll give you your money back!
All prices include shipping to USA and Canada.
TILLER-HAND® tiller control systemTILLER-HAND is a tiller control system that's based on a time tested principle: A control line secured at the port and starboard quarters is fed through a friction brake at the tiller. The brake is adjustable so that the tiller can be locked in any position, or can be allowed a selected degree of movement, or can be fully free . The TILLER-HAND is a boon to the single handed and short handed sailor: TILLER-HAND FEATURES
TILLER-HAND is constructed from strong, wear-resistant, reinforced plastic and stainless steel for durability and longevity in a marine environment. TILLER-HAND is compact and unobtrusive, can be mounted on the top or bottom of the tiller and is easy to install. The Delrin® pulley running on stainless steel ball bearings ensures smooth, even operation. Click here for Tiller-Hand installation instructions TILLER-HAND comes with 7 feet of ¼” braided control line and two fixing screws. A pair of carbon fibre cam cleats and stainless steel fairleads makes a neat and effective means of securing the control line on the Tiller-Hand All prices include shipping to USA and Canada. Goods despatched within 1 working day by Airmail. (UK and other EEC based customers, go to www.saltyjohn.co.uk for Sterling and Euro prices including VAT).
|
|
||
Bilge-Mate™Bilge-Mate™ is a solid state, automatic, electronic bilge pump switch designed to replace troublesome float switches. Bilge-Mate will not jam, clog, or wear out and will work in the cleanest or nastiest of bilges. A new method of reliably controlling bilge pumps, the Bilge-Mate has no moving parts and all electronic components are encased in epoxy. When the bilge water level touches the stainless steel sensors, the pump is activated after a 20-30 second delay. The pump runs while the sensors are wet and continues for 15-20 seconds after the sensors have dried. Easy to install; there’s no need to mount Bilge-Mate, just wire it up with the 3’ lead provided, drop it in the bilge and it will function in any position. 5 year warranty against manufacturing defects. N.B. BILGE-MATE will NOT operate in oil or fuel.
All prices include shipping to USA and Canada. Goods despatched within 1 working day by Airmail. (UK and other EEC based customers, go to www.saltyjohn.co.uk for Sterling and Euro prices including VAT).
Wiring diagram below
|
|
||
Bandit™ clear silicone self fusing compression tapeEssential kit for protection and repair! Bandit™ is a non-adhesive clear silicone tape that when applied under tension self fuses to form a strong, clean, waterproof, airproof, insulating wrap. Can be applied on wet, greasy and dirty surfaces. Contains no adhesive; the wrap is held in place by compression. To remove Bandit™ just cut the wrap and peel it off, there is no sticky residue. Temperature resistant: minus 65°C to plus 260°C Bandit™ has a multitude of uses:
And much, much more
All prices include shipping to USA and Canada. Goods despatched within 1 working day by Airmail. (UK and other EEC based customers, go to www.saltyjohn.co.uk for Sterling and Euro prices including VAT). |
|
||
Motor Grip™The Motor Grip™ provides a secure, top mounted, ergonomic lifting handle for outboard motors. For transferring your outboard from transom to cockpit, from tender to boat or from boat to dock the Motor Grip allows you to keep ‘'one hand for yourself'’. Lifting an outboard motor vertically requires two hands and a precarious balancing act! The Motor Grip provides a single comfortable lifting handle on top of the motor, leaving your other hand free to support yourself. Made in UK from strong polyester webbing and acetal snap buckles the Motor Grip can be quickly and easily attached to the motor. Should you wish, Motor Grip can be permanently left on the motor – it won’t interfere with motor operation. Fits most 2 stroke and 4 stroke motors up to 6HP weighing around 60 lbs. Click to see what Sailing Today said about the Motor Grip (PDF 1.7mb) All prices include shipping to USA and Canada. Goods despatched within 1 working day by Airmail. (UK and other EEC based customers, go to www.saltyjohn.co.uk for Sterling and Euro prices including VAT). |
The Motor Grip is a registered design of J. Schofield Ltd. |
||
Towing Bridle for your inflatable dinghyOur Clipper™ Towing Bridle provides secure and stable towing of inflatable dinghies and tenders. It is designed for use on dinghies that have two towing rings on the bow tubes. This two-point towing system provides great stability. The Towing Bridle is 5’ long and attaches to the dinghy towing rings with two 2 ½” stainless carbine hooks and to your towing line by a 1¾” stainless steel ring. An orange plastic float prevents the bridle from sinking when detached from the towing vessel. The Clipper™ Towing Bridle is manufactured in the UK using 1” black uv-stable polyester webbing with a breaking strain in excess of 2500 lbs. The ring and carbine hooks are made from AISI 316 grade stainless steel. All prices include shipping to USA and Canada. Goods despatched within 1 working day by Airmail. (UK and other EEC based customers, go to www.saltyjohn.co.uk for Sterling and Euro prices including VAT). |
 |
||
Clipper™ Davit Sling for inflatable, RIBS and hard dinghiesThese top quality davit slings provide the central connecting point for your dinghy davit hoists. They comprise two polyester webbing straps attached to a stainless steel lifting ring, each strap terminating in a stainless steel snap hook. Made from heavy duty polyester webbing and 316 grade stainless steel these davit slings have a safe working load in excess of 250 lbs, suitable for dinghies and RIB’s up to 12’ long. The polyester webbing has a breaking strength of 2500 lbs. Typically two davit slings are used, one attached at the transom and the other attached to the internal lifting rings, or the towing rings, at the bow. One sling is connected to each davit hoist. If required a single point hoist can be provided simply by bringing the two rings together and attaching the lifting line through both. Davit slings are available in three leg lengths: 13”, 16” and 20”. In most applications a pair of slings the same length, bow and transom, will be the right choice. If you intend to use the external bow rings for lifting the front end, however, you might choose a longer sling for the front, paired with a shorter sling at the transom. All prices include shipping to USA and Canada. Goods despatched within 1 working day by Airmail. (UK and other EEC based customers, go to www.saltyjohn.co.uk for Sterling and Euro prices including VAT). |
|
||
Clipper™ sail ties, set of four.Clipper™ sail ties are poly-webbing straps that fasten quickly and securely with acetal snap buckles. No more knot-tying – these sail-ties make securing your flaked sails to the boom easier and neater. Clipper™ sail-ties come in sets of four, each 6’ long. Each sail-tie can be adjusted for length by pulling the end of the tie at the buckle. If you wish to remove any excess length of strap this is easily done by cutting and then heat sealing the end with a lighter or match. Colours available are Red or Blue. All prices include shipping to USA and Canada. Goods despatched within 1 working day by Airmail. (UK and other EEC based customers, go to www.saltyjohn.co.uk for Sterling and Euro prices including VAT).
|
|
||
Clipper™ Tie-down strapThe Clipper™ Tie-down strap in 1” polywebbing, with snap buckle. 6’ long, fully adjustable. Used to secure batteries, outboard fuel tank or other heavy items. Made from 1” polywebbing, 6’ long; resistant to battery acid, grease and other chemicals. Strong - the buckle and strap have a breaking strain in excess of 150 lbs. Adjusts to length. Excess belt can be removed by cutting and sealing the end with a match or lighter. Comes with two 1” foot loops to hold the webbing down. Fasteners are not supplied because their type and size depends on how the strap is to be fitted. Colour: black All prices include shipping to USA and Canada. Goods despatched within 1 working day by Airmail. (UK and other EEC based customers, go to www.saltyjohn.co.uk for Sterling and Euro prices including VAT). |
 |
||
Mooringmate™mooring systemMooringmate™ is a system that lets you get a line onto a mooring buoy, dock cleat or mooring ring easily and safely. The mooring line is attached to the Mooringmate™ stainless steel mooring hook which clips into its trigger clip mounted on a boathook or other suitable pole. The mooring hook with mooring warp attached is presented to the buoy or cleat using the boat hook. When the mooring hook is in place the boat hook is withdrawn from the mooring hook and this action releases the spring loaded bale on the mooring hook, securing it. The mooring hook has a 1” wide opening and is constructed from 316 grade stainless steel. It has a safe working load of a ton (2000lbs). Boathook and line are not included. All prices include shipping to USA and Canada. Goods despatched within 1 working day by Airmail. (UK and other EEC based customers, go to www.saltyjohn.co.uk for Sterling and Euro prices including VAT).
|
|
||
Cableport - a safe, waterproof deck entry for mast cables.The Cableport is a polished stainless steel entry port that takes electrical and communication cables through the deck via a 2” shrouded opening. Cableport can take 6 cables up to Ø 0.5”, or more of smaller diameter. It can accommodate connectors up to Ø 1.75”. (A typical PL259 radio connector is Ø 0.75”) It can be easily opened to remove cables and connectors when the mast is unstepped or when wiring changes are made. (No silicone or other sealant is required after initial installation). Cableport does not catch rigging and lines and can be stepped on without damage. Comes with mounting hardware. Dimensions: 6.25” x 4” x 1.75”. The Swedish designed Cableport is in use on thousands of boats worldwide and is original equipment for several top class builders.
|
|
||
Automatic LED anchor and general utility light, 12v - runs off the boat’s batteries.Rugged and reliable, it automatically switches on at dusk and off at dawn to conserve power. The ‘bulb’ in this anchor light is a regulated cluster of nine wide-angle, super-bright LED’s. Eight LED’s provide the 360º horizontal pattern and a ninth in the end of the cluster provides down light. LED’s (light emitting diodes) have very low power consumption and an extremely long life, typically 50,000 hours or more. They are rugged and reliable when properly constructed. Visibility in excess of 2nm. Meets International Colregs requirements as an anchor light for recreational vessels under 20 meters. The base of the Fresnel lens is clear to provide area lighting. A hanging bracket is included. All prices include shipping to USA and Canada. Goods despatched within 1 working day by Airmail. (UK and other EEC based customers, go to www.saltyjohn.co.uk for Sterling and Euro prices including VAT).
|
|
J. Schofield Ltd (Salty John Boat Products).
Oakwood House, Cartford Lane, Little Eccleston, Preston PR3 0YP, UK
PHONE: +44 (0) 1995 672556 FAX: +44 (0) 1995 672425 E-MAIL: info@saltyjohn.com